Introduction
If you want to make sure that your 4wd is in tip-top shape before going on a trip, then following this checklist can help you out.
Use High-Quality Parts
You should also be sure to use high-quality parts like this terrain tamer, as these are generally going to last longer and will make your vehicle safer. This includes using factory-recommended components and fluids. For example, if your manufacturer recommends that you use a certain type of oil for your car’s engine, then stick with that recommendation! Don’t try to save money by using second-hand or off-brand parts—you could end up causing more damage than good.
The same goes for other automotive parts like filters: Don’t cheap out on them either!
Check Tyres
The first thing you should do when checking your car is to check the tires. When changing a tire, it’s important to make sure that your vehicle can handle the load and not cause any damage.
Checking tire pressure is vital for ensuring a smooth drive. The correct pressure for 4WDs will vary depending on what type of terrain you are driving through and also how heavy your load is. Check your manual for information about how much air pressure should be in each tire, or use an app like Tire Pressure Monitor (free), which has tips on how much air pressure needs to be added, as well as reminders so you don’t forget!
You should also check tread depth and look out for damage or wear while you’re at it! If there’s too much tread worn down then this could lead to dangerous situations on rough roads so make sure they have enough grip before hitting them with too much speed. Contact industrial tyres in Wollongong if you want it fixed.
Prepare the Trolly Jack
The first thing you want to do is check your jack.
- Is the jack secure and in working order? If not, then it’s time for a new one!
- Does it have enough gas to lift your vehicle? Do you have an extra can in case of emergencies?
- If so, make sure that it’s positioned correctly. This means placing the jack underneath your car and making sure there are no other objects around that could be damaged by its weight or accidentally hit during use.
- Another important step is to make sure there’s enough grip on the ground under where you place your vehicle when lifting it with a 4×4 trolley jack – if not, then try moving around until you find something like concrete (not dirt) which will provide better support than dunes or grasslands
Check the Water Pump
The water pump is one of the most important parts of your vehicle. Your engine will not function without a working water pump, so you must keep it checked regularly. To check your water pump, look for signs of wear and tear as well as corrosion. These could indicate that your pump needs to be replaced. You should also keep an eye out for cracks or leaks, which are signs that there may be damage inside the pump itself. If you find any of these problems with your current water pump, stop driving immediately!
Check the Oil Pan and Gasket
- Check the oil pan and gasket.
- If there is a leak, you need to fix it.
- If the gasket is damaged, you will need to replace it.
- If the oil pan is damaged, you will need to replace it.
Clean the Battery Terminals
Clean the Battery Terminals
- Use a wire brush to clean the battery terminals.
- Apply a small amount of grease on both ends of each terminal, then tighten them securely.
- Fully charge your battery before going on a long trip, and recharge it immediately after returning from your trip so you can use it again soon (this will prolong its lifespan).
These tips will help you prepare your 4wd before hitting the road
- Check the oil pan, water pump, and battery terminals.
- Check the tires and make sure they are in good condition (flat spots on tires can cause damage to your 4wd).
- Make sure your trolly jack is in good working order.
Conclusion
With these tips, you will be able to keep your 4wd in top condition. Your vehicle should be ready for whatever Mother Nature throws at you!